Skip to Content
    
Advanced Search
Home > Homecare & Decor > Construction & Remodeling > About Tools

About Tools

Links

> >|

Adhesives

AdhesivesTools - Adhesives The best joining is accomplished with adhesives, in conjunction with screws, nails, or other fasteners. A few of the more common types include: Polyvinyl (carpenter's wood glue) . This is a white, creamy glue, usually available

 

Added: Mon Oct 14 2002
Views: 162
7 out of 10 stars

Cutting and Drilling: Hand Tools

Cutting and Drilling: Hand ToolsTools - Cutting and Drilling (Hand) Most Common Mistakes Setting a board to be cut between two supports. Instead, cantilever the board over the outside of one support to avoid binding the saw blade when the board drops. Thi

 

Added: Mon Oct 14 2002
Views: 252

Cutting and Drilling: Power Tools

CuttingCutting and Drilling: Power ToolsTools - Cutting and Drilling (Power) Most Common Mistakes Setting a board to be cut between two supports. Instead, cantilever the board over the outside of one support to avoid binding the saw blade when the board d

 

Added: Mon Oct 14 2002
Views: 239

Cutting Fair and Square

Cutting Fair and SquareCutting Fair and Square Here's a fast, foolproof way to make perfectly square, 90-degree crosscuts with a circular saw. Mark the cut line on the board and position the saw with its blade on the line. Hold a framing square with its l

 

Added: Mon Oct 14 2002
Views: 235

Fasteners and Connectors

Fasteners and ConnectorsTools - Fasteners and Connectors Ready-made fasteners and connectors are now on the market for just about any job you may need to do, whether it's building a fence, a deck or a house. They can be used where wood meets wood, concret

 

Added: Mon Oct 14 2002
Views: 212

Getting Down to Basics

Getting Down to BasicsTools - Getting Down to Basics What You Will Be Doing Let's review building a tool inventory, the distinction of quality when purchasing, and the appropriate use and care of your tools and work area. The various types of tools are th

 

Added: Mon Oct 14 2002
Views: 233

Measuring and Leveling Tools

Measuring and Leveling ToolsTools - Measuring and Leveling Most Common Mistake Not measuring more than once. A good carpenter measures three times and cuts once. Accuracy and care in measuring are all important They can mean the difference between a well-

 

Added: Mon Oct 14 2002
Views: 164

Planes, Files and Rasps

Planes, Files and RaspsTools - Planes, Files and Rasps Finishing is usually the last step in building a project. The finishing tools are designed to smooth something to its desired finished state. Planes Planes are for removing very thin layers of wood, f

 

Added: Mon Oct 14 2002
Views: 125

Pneumatic Tools

Pneumatic ToolsTools - Pneumatic Tools Pneumatic tools are fast becoming recognized as both affordable and indispensable to the home do-it-yourselfer. Pneumatic means containing air. Specifically, pneumatic tools include an air compressor and a variety of

 

Added: Mon Oct 14 2002
Views: 127

Sanding Tools

Sanding ToolsTools - Sanding Tools Most Common Mistakes Allowing a power sander to dig into wood being finished. To avoid this, the sanding machine always moving over the wood. Putting the belt on a belt sander backward. This tears the seams. Using an ina

 

Added: Mon Oct 14 2002
Views: 132

> >|