Your Ad Here
  
Home > Homecare & Decor > Construction & Remodeling > About Tools > Page 2

About Tools

|< <


Screwdrivers and Screws

Screwdrivers and ScrewsTools - Screwdrivers and Screws Screwdrivers are self-explanatory. They are used to drive in and remove screws. Too often they are wrongly used - for chipping, punching holes, scraping, prying, and so forth. The Philips head is a co

 

Mon Oct 14 2002
Views: 120


Tips and Types of Hammers

Tips and Types of HammersTools - Tips and Types of Hammers Most Common Mistakes Choking up on the hammer handle. This reduces leverage and usually disables the head from striking flat against the surface being struck. Not pre-drilling a pilot hole before

 

Mon Oct 14 2002
Views: 136


Tools Checklist

Tools ChecklistTools - Checklist Tools for Measuring and Leveling Steel tape measure Torpedo level 2' to 4' level Carpenter's square Plumb bob Chalk line Combination square Power Tools for Cutting and Drilling Circular saw Band saw Jig saw 3/8 variable-sp

 

Mon Oct 14 2002
Views: 99


Wrenches, Pliers, and Clamps

Wrenches, Pliers, and ClampsTools - Wrenches, Pliers and Clamps Most common Mistakes Using extra-leverage items, to tighten clamps. At some point in any project you will be attaching, dismantling, or assembling what you have been measuring and sawing. The

 

10 out of 10 stars
Mon Oct 14 2002
Views: 133


|< <